Add end segment to existing wall using 3-D sketch - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall that you want to add to.

  4. Click Select a Path on the ribbon.

  5. Click Sketch 3D .

  6. Click Create on the ribbon.

  7. Select one of the boxes on the existing wall path as your starting point. If you can add to the wall path from that path point, the box will turn red to indicate that you have selected it. If the box does not turn red, you cannot add on to the wall from that path point.

  8. Define the addition to the path using the path commands. For more information, see Define a path.

  9. Click Finish.

  10. Edit the wall system, type, composition, and other properties if needed.

  11. Optionally, click Select Boundaries to limit the height of the wall.

  12. Click Finish.

    The software places the wall extension in the model.