Place horizontal cross bracing - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)

Show me

  1. Click Place X Bracing on the vertical toolbar.

  2. In the Bracing Type box, select Cross.

  3. In the Type category box, select the cross bracing member type category to place.

  4. In the Type box, select the cross bracing member type to place.

  5. Set the Section Name, Cardinal Point, and Angle options as required.

    You can set the beta angle relative to your rotated coordinate system by activating PinPoint and selecting the rotated coordinated system as the active coordinate system in the Coordinate System box.

  6. Select the first member to support the cross bracing. This member is one of the "side" members to which the bracing connects.

  7. Select the second member to support the cross bracing. This member is the other "side" member to which the bracing connects.

  8. Optionally, select one or two members to define the extent of the cross bracing. If you do not select these members, the software uses the end locations of the two selected members as the end locations of the cross bracing.

  9. Click Finish.