Place a slab by selecting objects and drawing 2-D boundaries - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. Click Place Slab on the vertical toolbar.

  2. Define a plane for the slab.

    Define Plane as Coincident
    Define Plane using Offset from Plane
    Define Plane using Angle to Plane
    Define Plane using Vector and Point
    Define Plane using Three Points

  3. Click Accept .

  4. Click Select Boundaries .

  5. Select objects in the model to define part of the slab boundaries. You can select members, grid lines, edges of equipment, edges of other slabs, or most anything else in the model to define the slab boundaries.

  6. Click Add References to Sketch 2D .

  7. Select objects in the model that you want to see when drawing the slab boundaries in the 2-D environment.

  8. Click Draw .

  9. In the 2-D environment, draw the remaining boundaries of the slab. The object boundaries that you selected are displayed in black. The objects that you selected for sketch landmarks display in blue. The boundaries that you selected and the boundaries that you draw must form closed shape. You can draw the boundaries for multiple slabs at the same time in the 2-D environment.

  10. In the 2-D environment, click Close.

  11. Click Accept .

  12. Set the slab system, type, priority, face position, and other properties.

  13. Click Finish.