Support vessels with 0 degree oriented lugs - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)

Show me

  1. Click Place Vessel Supports Command on the vertical toolbar.

  2. Select the vessel around which to place the supports.
    -OR-
    Key in the Easting and Northing coordinates of the vessel's center.

  3. Set Lug Orientation to 0 Degrees.

  4. Key in the clearance between the side of the vessel and the support members being placed.

  5. Select a system, type, section, and cardinal point for the support members. This command only supports the placement of W, M, HP, S, C, MC, BUI, BUC, BUTee, BUIUE, and BUBoxFM sections.

  6. Select the four main support members in clockwise order.

  7. Click Finish.