Move a member - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)
  1. Click Select on the vertical toolbar.

  2. Select Member Parts in the Locate Filter.

  3. Select a member to move.

  4. Click Move on the main ribbon.

  5. Define the first point of a vector used to move the member.

  6. Define the second point of the vector.

The frame connections might prevent you from moving the member as you would like. For example, a supported member has a seated frame connection to a supporting member. The seated frame connection prevents you from moving the supported member off of the supporting member. You can, however, slide the supported member along the supporting member as long as the seated frame connection is still valid. Consider copying and pasting a member that you want to move, and then deleting the original.

If you have a member part selected, press CTRL + END to switch the selection to the part's frame connections.