Place a slab by selecting boundary objects - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.1(2019)

Show me

  1. Click Place Slab on the vertical toolbar.

  2. Set the parent system for the slab, the slab type and composition, and face position.

  3. Define a plane for the slab.

    Define Plane as Coincident
    Define Plane using Offset from Plane
    Define Plane using Angle to Plane
    Define Plane using Vector and Point
    Define Plane using Three Points

  4. Click Accept .

  5. Click Select Boundaries .

  6. Select objects in the model to define the boundaries of the slab. You can select members, grid lines, edges of equipment, edges of other slabs, or most anything else in the model to define the slab boundaries. The selected objects must roughly define a close shape.

  7. Click Accept .

    The software displays the slab in dynamics.

  8. Click Finish.