Analysis Model has more than one boundary condition folder - Intergraph Smart 3D - Administration

Intergraph Smart 3D Database Integrity Administration

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Administration
Version_S3D
12.1(2019)

Message

Analysis Model has more than one boundary condition folder.

Severity

Crucial.

Detailed Description

Analysis Model has more than one boundary condition folder.

Possible Cause

If two or more boundary condition folders exist under a single analysis model, the relationship between the boundary condition folder and its analysis model is not accessible. Failure to access this folder will not be detected when a new boundary condition is created, resulting in the creation of a second boundary condition folder.

Possible Impacts

During the operation of exporting the analysis model, the software may fail to detect that the boundary conditions under the additional folders are actually associated to the analysis model. The software will not export these boundary conditions.

What You Should Do

The only solution to resolve this situation is to remove your analysis model, which will remove all your boundary conditions. You can accomplish this task by completing the following procedure:

  1. Copy your load combinations to the catalog.

  2. Delete your analysis model.

  3. Re-create your analysis model.

  4. Paste from catalog your copied load combinations into your new analysis model load combination folder.

  5. Re-define your boundary conditions.