Place a tee from a P&ID - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.1(2019)
  1. Click SmartPlant > Retrieve to retrieve the P&ID drawing that contains the pipe runs for that branch. You can skip this step if the P&ID has already been retrieved.

  2. Click SmartPlant > View P&ID to view the P&ID drawing that contains pipe runs.

  3. Review the P&ID to determine where you need to insert the tee or branch in the model. Specifically, you need to identify the header and branch pipe runs.

  4. Click Insert Component on the vertical toolbar.

  5. Select the header run in which to insert the tee or another branch component.

  6. Select the component type and the option in the Type and Option boxes.

  7. Position the component on the header pipe run.

  8. Click Finish.

  9. Using the Route Pipe command, route the branch pipe run into the branch component that you just placed on the header pipe run.

    As you model and branch into a header line, a tee is automatically generated by the software.