Create a profile face template set - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Manufacturing

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)
  1. Click Template .

  2. On the Template ribbon, click Profile Parts .

  3. From the Template Type list, select Profile Face.

  4. Select the profile parts for which you want to create the template set.

    You can select the parts in the model, or from the Workspace Explorer.

  5. Click Base Plane if you want to change the balance type, template side, or choose a related template.

  6. Click Accept .

  7. Click Base Control Line if you want to manually sketch the base control line. Using the available drawing commands in the 2D environment, draw the base control line.

  8. Click Add Template if you want to manually sketch template locations. Using the available drawing commands in the 2D environment, draw the templates.

  9. Click Accept to display a preview of the template set.

  10. If necessary, click Bottom Line to manually extend the bottom line of the template set.

  11. Click Finish on the ribbon in the 2D environment.

  12. Select the Process type.

  13. Click Properties , and change the default Process and Marking Set values if needed.

  14. Click OK.

  15. Click Finish.