Stiffener Profile System by Table - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

 The Stiffener Profile System by Table command creates a stiffener profile system on the selected plate system by defining the landing curve as coordinates in a table. This command is particularly useful when placing stiffener profiles on a hull or other multi-curved shape.

You can control the boundaries of the stiffener profile by selecting a plate system, profile system, seam or grid plane that intersects the landing curve. If you do not define boundaries, the software uses the landing curve ends as the stiffener profile boundaries.

After defining the landing curve and the boundaries, you can set the profile orientation. The plate system side and the flange direction for unsymmetrical profile sections are set by the molded convention of the plate system. However, you may override the default settings by using the Profile Properties dialog box.

When a stiffener profile system is created, a stiffener part is also created. Profile parts are detailed in the Structural Detailing task and then used to create manufacturing parts in the Structural Manufacturing task. Properties of the part can be modified. For more information, see Stiffener Part Properties Dialog Box.

Stiffener Profile System by Table Ribbon

Landing Curve Table Dialog Box

What do you want to do?