Place an in-line can - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
10.1 (2014 R1)

Show me

  1. Click Place Can on the vertical ribbon.

  2. From the Catalog browser or from Can Type on the ribbon, select the in-line can rule to place from the Catalog.

    Select one of the Custom Inline Can types to change individual can parameters.

  3. Select the location of the in-line can along the supporting leg member.

  4. Click Primary Member Information on the ribbon.

    The software displays the name, outside diameter, inside diameter, and plate thickness of the selected supporting leg.

  5. Select the transverse members that participate in the can. Transverse members are used in calculating the can length.

  6. Click Accept .

  7. If you are placing a Custom Inline Can type, change the diameter, thickness, computation method, factor, and cone parameters on the ribbon to meet your needs. If you are placing a predefined can from the Catalog, these settings are read-only.

  8. Click Finish.