Place stiffener profile by intersection - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)
  1. Click Stiffener Profile System by Intersection on the vertical toolbar.

  2. Select the plate system to stiffen.

  3. Select the Section Type and Section Size.

  4. Click Landing Curve Definition .

  5. Select a grid plane that intersects the plate system that you selected.

  6. Click Profile Orientation Definition .

  7. Define the orientation of the stiffener profile with regard to the plate system.

  8. Click Boundary Definition .

  9. Define the boundaries for the stiffener profile.

  10. Click Accept .

  11. If the boundary definition results in two solutions, pick the needed solution using the following procedure:

    Solve ambiguous solution created by selected boundaries

  12. Click Finish.

  • Stiffener profiles are always associated with the plate system to which they belong.

  • You can select more than one grid plane to place multiple stiffener profiles at one time.