Measure Explicit Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Displays options for cumulatively measuring girth distances along curves.

Coordinate System Properties

Shows properties of the active coordinate system.

Coordinate System

Assigns the coordinate system to use to define the axis directions.

Define Coordinate System by 3 Points

Defines a temporary coordinate system by three points. Point 1 defines the origin of the coordinate system. Point 2 defines the end of the local X-axis. Point 3 defines the end of the local Y-axis.

Cumulative

Sums repeated measurements.

Clear

Resets the value of Cumulative to zero.

Distance

Displays the distance value. You can specify the units by clicking Tools > Options and selecting the Units of Measure tab. For more information, see Change a displayed unit of measure in the Common User's Guide.

D X

Displays the distance along the X-axis.

D Y

Displays the distance along the Y-axis.

D Z

Displays the distance along the Z-axis.