Modify geometry type - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)
  1. Click Select on the vertical toolbar.

  2. Select the appropriate filter in the Locate Filter: Root Plates, Root Profiles, Seams, or RefCurve On Surface & Knuckles.

  3. Select the plate system, profile system, or seam to modify.

  4. Click Edit > Change Geometry Type.

    The Change Geometry Type dialog box displays.

  5. Select the new geometry type, and then click OK.

  6. Using the ribbon controls for the new geometry type, define the parameters for the object. The workflow is similar to placing a new plate system, profile system, or seam. See the appropriate topic for details:

    Place a planar plate system
    Place a linear extruded plate system
    Place a nonlinear extruded plate system
    Place a revolved plate system
    Create a ruled plate system using existing curves
    Place stiffener profile by intersection
    Place stiffener profile by offset
    Place stiffener profile by projection
    Place stiffener profile by table
    Place a seam by intersection
    Place a seam by offset
    Place a seam by Projection
    Place a seam by table

  7. Click Finish on the ribbon bar to complete the geometry type change.