Can - Cone Transition - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

  • The bottom leg and top leg are of different sizes.

  • The can matches the outer diameter of the bottom leg.

  • The cone matches the outer diameter of the top leg.

  • The column is continuous before the can is placed.

  • The beam is a built-up member

  • The can is inserted first, then the leg sizes are changed.

  • For more information on the chamfer properties, see Chamfer Properties Dialog Box.

  • Inserting cans may result in two root logical connections with duplicate geometry. However, Assembly Connections and Physical Connections are only created for one of the Logical Connections.

See Also

Detailing Built Up Connections