Place a seam by Projection - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
10.1 (2014 R1)
  1. Click Seam by Projection on the vertical toolbar.

  2. Select the plate system for the seam.

  3. Define the landing curve using one of the following methods:

    Define landing curve by 2D .

    Define landing curve by 3D .

  4. Click Boundaries .

  5. Define the seam boundaries using one or more of the following methods. If you do not select boundaries, the software applies the entire length of the base curve to the resulting seam curves.

    Pick boundaries
    Define a boundary curve

  6. Click Accept .

  7. Select if you are placing a design seam or a planning seam.

  8. If the boundary definition results in two solutions, pick the needed solution using the following procedure:

    Solve ambiguous solution created by selected boundaries

  9. Click Finish to place the seam.