Place a seam by intersection - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)
  1. Click Seam by Intersection on the vertical toolbar.

  2. Select the plate system to receive the seams.

  3. Click Intersecting Objects .

  4. Select an intersecting grid plane or intersecting plate system where you want the seam.

  5. Click Boundaries .

  6. Define the seam boundaries using one or more of the following methods. If you do not select boundaries, the software uses the entire length of the base curve to apply to the resulting seam curves.

    Pick boundaries
    Define a boundary curve

  7. Click Accept .

  8. If the boundary definition results in two solutions, pick the needed solution using the following procedure:

    Solve ambiguous solution created by selected boundaries

  9. Select whether to place a design seam or a planning seam.

  10. Click Finish to place the seam.