Stiffener Profile System by Projection - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Intergraph Smart 3D
10.1 (2014 R1)

 The Stiffener Profile System by Projection command creates a stiffener profile system on the selected plate system by projecting a 2D or 3D landing curve that you have sketched onto the plate system.

You can control the boundaries of the stiffener profile by selecting a plate system, profile system, seam or grid plane that intersects the landing curve. If you do not define boundaries, the software uses the landing curve ends as the stiffener profile boundaries.

After defining the landing curve and the boundaries, you can set the profile orientation. The plate system side and the flange direction for unsymmetrical profile sections are set by the molded convention of the plate system. However, you may override the default settings by using the Profile Properties dialog box.

When a stiffener profile system is created, a stiffener part is also created. Profile parts are detailed in the Structural Detailing task and then used to create manufacturing parts in the Structural Manufacturing task. Properties of the part can be modified. For more information, see Stiffener Part Properties Dialog Box.

Profile Knuckles

If the plate system associated with the profile has an angle with no radius on the extrusion curve, the software creates a profile knuckle object. You can select this object graphically, or in the Workspace Explorer. For more information, see Profile Knuckle Properties Dialog Box.

Stiffener Profile System by Projection Ribbon

Knuckle Best Practices

What do you want to do?