Can - Diameter Change - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

  • The column is doubly sloping (sloping X-Z and Y-Z plane).

  • The column is continuous before the can is placed.

  • The can is placed with an outer diameter that is larger than either leg.

  • The beam is a built-up member.

  • For more information on the chamfer properties, see Chamfer Properties Dialog Box.

  • Inserting cans may result in two root logical connections with duplicate geometry. However, Assembly Connections and Physical Connections are only created for one of the Logical Connections.

See Also

Detailing Built Up Connections