Define landing curve by 2D - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
10.1 (2014 R1)
  1. Click Define using 2D Sketcher .

  2. Define a sketching plane using one of the following methods:

  3. Define plane as coincident
    Define plane using offset from plane
    Define plane using angle from plane
    Define plane using point and vector
    Define plane using three points
    Define plane by vectors normal

  4. Click Add Intersecting Item .

  5. Select objects in the model that intersect the sketching plane that you want to use as reference geometry. These extra objects appear in the 2D environment.

  6. Click Add Projection Item .

  7. Select objects in the model that do not intersect the sketching plane that you want to use as reference geometry. These extra objects are projected onto the sketching plane and appear in the 2D environment.

  8. Click Sketch 2D .

  9. Sketch the 2D stiffener profile landing curve that you want the software to project onto the plate system that you are stiffening. For more information, see Sketch 2D Best Practices.

    You can constrain the landing curve to geometric construction points offset from plate systems. For more information, see Point at Minimum Distance Command in the SmartSketch Drawing Editor Drawing Editor Help, available within the 2D environment.

  10. Click Finish.