Section Orientation Tab (Edge Reinforcement Profile Part Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Specifies the section orientation settings for the edge reinforcement profile part.

Position

Displays how the cross-section of the profile is attached to the free edge.

Primary Orientation

Displays which side of the plate to place the edge reinforcement profile.

Secondary Orientation

Displays the direction of the web thickness for symmetrical crossing-sections and the direction of the flange and web thickness for unsymmetrical cross-sections.

Parent System Type

Displays the object type of the parent system.

Offset

Displays the distance that the cross-section is offset from free edge or from the plate face.

Mounting Face

Displays the cross-section face to mount to the plate.

Load Point

Displays the cross-section load point through which the landing curve passes.

Start Connection Method

Defines the method of connecting the beginning of the profile to its plate, profile, or member boundary. By Rule is the default setting. The connection is determined by assembly connection rules defined for Structural Detailing. Other connection methods can be added as part of your reference data customization.

End Connection Method

Defines the method of connecting the end of the profile to its plate, profile, or member boundary. By Rule is the default setting. The connection is determined by assembly connection rules defined for Structural Detailing. Other connection methods can be added as part of your reference data customization.