Place a fillet surface between two surfaces - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)
  1. Create the point needed as the tracking point to locate the fillet surface by using Insert > Control Point, Insert > Topological Points, or other geometric construction point interfaces.

    Control Point in the Common User's Guide

    Topological Points (Insert Menu)

    Points (Geometric Construction Palette Dialog Box)

  2. On the geometric construction ribbon, click More in the Geometric Construction box.

    The Select Geometric Construction dialog box displays.

  3. Select SurfByFillet and click OK.

  4. Select the first surface.

  5. Select the second surface.

  6. Select the tracking point.

    A preview of the fillet surface displays.

  7. Click Continue.

    Temporary geometry displays in the graphic view and as SurfByFillet in the Geometric Construction Explorer.

  8. If needed, create additional geometric constructions.

  9. Click Close to return to the main command ribbon.

The geometric constructions are not created and saved to the model until you click Finish on the main command ribbon to create the model object.