Side Plate - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Tooltip: SidePlate

Creates a side plate by connecting all flanges on a set of incoming members that share a nodal connection. The corners of the side plate are square.

The physical axes of the members are end-point connected and coplanar. The common end point is the node. You must have at least two members with non-collinear axes. The incoming flange and web plate parts are trimmed. For built-up members, the software trims the incoming flange and web parts by the edges of the side plate.

The macro computes a local coordinate system from the following:

  • X-axis - Defined by the axis of the first selected member oriented from the nodal point to the other end of the member.

  • Y-axis - Defined by the axis of the second selected member oriented from the nodal point to the other end of the member.

  • Z-axis - Calculated as the cross-product of X-axis by Y-axis.

The type of free edge on the side plate depends on the angle between the axes of two adjacent members.

Side Plate Ribbon

What do you want to do?