Perform an automatic rebound - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)
  1. Select Tools > Automatic Rebound.

  2. For Old boundary filter, select an object type from the list.

  3. Specify the old boundary object in the Old boundary object box. You can select the object from either the Workspace Explorer or the graphic view, type the object name into the box, or select an object from the list, which shows the last ten selections you have made.

    After you select the old boundary object, all the entities that are bounded to this object are shown in Candidates list.

  4. Select the scope filter, and optionally, the entity filer.

  5. In Candidates list, select candidates to rebound.

    Selected candidates are shown in green in the graphic view.

  6. For New boundary filter, select an object type from the list.

  7. Specify the new boundary object in the New boundary object box. You can select the object from either the Workspace Explorer or the graphic view, type the object name into the box, or select an object from the list, which shows the last ten selections you have made.

  8. Click Rebound.

  9. Click View Log to see the rebound status.

    The Automatic Rebound Log dialog box displays.

  10. Click Save As on the Automatic Rebound Log dialog box to save the completed automatic rebound operation log.