Nonlinear Extruded Plate System - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Intergraph Smart 3D
10.1 (2014 R1)

The Nonlinear Extruded Plate System command extrudes a plate system from a 2D curve along a linear or nonlinear curve that you specify. The software uses the 2D curves to define the plate system surface geometry.


Use the Linear Extruded Plate System command instead of this command if the 2D curve remains normal to the sketching plane. For more information, see Linear Extruded Plate System.

Plate Knuckles

If the plate system has an angle with no radius on the extrusion curve, the software creates a plate knuckle object. You can select this object graphically, or in the Workspace Explorer. For more information, see Plate Knuckle Properties Dialog Box.

Nonlinear Extruded Plate System Ribbon

What do you want to do?