General Tab (Edge Reinforcement Profile Part Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Specifies general properties of the stiffener part. Some properties displayed duplicate those available on other tabs, such as the Main tab. The property name appears on the left side of the grid and the corresponding property value appears on the right side of the grid.

flangeDirection

Specifies the direction of the web thickness for symmetrical crossing-sections or the direction of the flange and web thickness for unsymmetrical cross-sections.

NamingCategory

Displays the codelist value for Naming Category, defined on the Main tab. For more information, see Main Tab (Edge Reinforcement Profile Part Properties Dialog Box).

orientation

Specifies the orientation of the edge reinforcement.

ProfileType

Specifies the profile type of the part. The list is defined by the StrMfgProfileType codelist.

webThicknessOffset

Specifies the offset direction along the plate face.

webThicknessOrientation

This property is not used.