Create a ruled plate system using existing curves - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)
  1. Click Ruled Plate System .

  2. Click First Curve Definition .

    Pick Curve is selected as the default option.

  3. Select the first curve.

  4. Click Second Curve Definition .

    Pick Curve is selected as the default option.

  5. Select the second curve.

  6. Click Define Boundaries .

  7. Define the ruled plate system boundaries using one or more of the following methods:

    Pick boundaries
    Define a boundary curve

  8. Click Accept .

  9. If the boundary definition results in more than one solution, you must select bounded areas that together compose the total bounded area. Pick the needed solutions using the following procedure:

    Solve ambiguous solution created by selected boundaries

  10. Set the remaining plate system properties.

  11. Click Finish.