Place a linear extruded plate system - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
10.1 (2014 R1)
  1. Click Linear Extruded Plate System on the vertical toolbar.

  2. Specify the sketching plane for the mother curve using one of the following methods:

    Define plane as coincident
    Define plane using offset from plane
    Define plane using angle from plane
    Define plane using point and vector
    Define plane using three points
    Define plane by vectors normal

  3. Click Add Intersecting Item .

  4. Select objects in the model that intersect the sketching plane that you want to use as reference geometry. These extra objects appear in the Sketch 2D environment.

  5. Click Add Projection Item .

  6. Select objects in the model that do not intersect the sketching plane that you want to use as reference geometry. These extra objects are projected onto the sketching plane and appear in the Sketch 2D environment.

  7. Click Sketch 2D .

  8. In the Sketch 2D environment, sketch the mother curve for the extruded plate system.

  9. Click Finish in the Sketch 2D environment.

  10. Click Define Boundaries .

  11. Define the plate system boundaries using one or more of the following methods:

    Pick boundaries

    Define a boundary curve

  12. Click Accept .

  13. If the boundary definition results in more than one solution, you must select bounded areas that together compose the total bounded area. Pick the needed solutions using the following procedure:

    Solve ambiguous solution created by selected boundaries

  14. Set the remaining plate system properties.

  15. Click Finish.