Seam by Table - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Intergraph Smart 3D
10.1 (2014 R1)

 The Seam by Table command creates a design or planning seam on the selected plate system by defining the landing curve as coordinates in a table.

You can control the boundaries of the seam by selecting the parent plate system, seam, or split knuckle line that intersects the landing curve. If you do not define boundaries, the software uses the landing curve ends as the seam boundaries. Seams must end at a plate system boundary or at another seam on the same plate system. The seam can cross an opening in the plate system.

Seam By Table Ribbon

Landing Curve Table Dialog Box

What do you want to do?