Not used in splitting. - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
10.1(2014R1)

Description

The seam is on a plate that is split, but it was not added to the split list

Possible Cause

The seam was created after the plate was split or it was not selected when the Execute Split command was run on the plate.

What You Should Do

  1. From the Execute Split command, add the seam to the split list and apply the changes.