Suggested Conversion Factors for AutoCAD - Intergraph Smart 3D - Administration

Intergraph Smart 3D Project Management

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Administration
Version_S3D
12.x(2018)

The information below provides suggested metric and imperial conversion factors when using AutoCAD or MicroStation data files. The conversion factor has been commented out.

You can clear the Acis Conversion Factor and assign any factor (such as 1.0, or 25.4, or 1000.0)

AutoCAD Conversions

AutoCAD source file scaled for kilometers

[AutoCAD Options]
Master Units = 63
Sub Units = 63
Sub Units Per Master Units = 1
Positional Units Per Sub Unit = 1
;Acis Conversion Factor = 1.0 // or 25.4 or 1000.0

AutoCAD source file scaled for centimeters

[AutoCAD Options]
Master Units = 62
Sub Units = 62
Sub Units Per Master Units = 1
Positional Units Per Sub Unit = 1
;Acis Conversion Factor = 1.0 // or 25.4 or 1000.0

AutoCAD source file scaled for meters

[AutoCAD Options]
Master Units = 59
Sub Units = 59
Sub Units Per Master Units = 1
Positional Units Per Sub Unit = 1
;Acis Conversion Factor = 1.0 // or 25.4 or 1000.0

AutoCAD source file scaled for millimeters

[AutoCAD Options]
Master Units = 61
Sub Units = 61
Sub Units Per Master Units = 1
Positional Units Per Sub Unit = 1
;Acis Conversion Factor = 1.0 // or 25.4 or 1000.0

AutoCAD source file scaled for Feet

[AutoCAD Options]
Master Units = 65
Sub Units = 65
Sub Units Per Master Units = 1
Positional Units Per Sub Unit = 1
;Acis Conversion Factor = 1.0 // or 25.4 or 1000.0

AutoCAD source file scaled for Inches

[AutoCAD Options]
Master Units = 64
Sub Units = 64
Sub Units Per Master Units = 1
Positional Units Per Sub Unit = 1
;Acis Conversion Factor = 1.0 // or 25.4 or 1000.0