I-Data Integrator processes the Isogen output report files listed in the table below. I-Configure controls the output of these files. You set up these reports using Isogen Configuration. For more information, see the Isogen Configuration Help.
Isogen Report File |
FLS Entry |
OPT Entry |
Material Control |
MATERIAL-CONTROL |
-104 |
Weld Summary |
WELD-SUMMARY-APPEND |
-125 |
Spool Information |
SPOOL-INFORMATION-FILE |
-154 |
Bending Report |
BENDING-FILE-APPEND |
-127 |
Cut List Summary |
CUT-LIST-SUMMARY-APPEND |
-129 |
Centerline Length |
CENTRELINE-LENGTH |
-109 |
Repeatability Return |
REPEATABILITY-RETURN |
-117 |
Drawing Cross-Reference |
DRAWING-CROSS-REF-FILE |
-158 |
Site Assembly |
SITE-ASSEMBLY-FILE-APPEND |
-164 |
In most cases, you must use an input file to specify the format and content of the output file, as shown in the following table. In the indicated cases, the Isogen report file is a fixed format.
Output |
FLS definition |
OPT Definition |
MATERIAL CONTROL |
MATERIAL-LIST-DEFINITION |
-122 |
CUT-LIST-SUMMARY |
MATERIAL-LIST-DEFINITION |
-122 |
WELD SUMMARY |
WELDING-DEFINITION |
-120 |
SPOOL INFORMATION |
DRAWING-DEFINITION |
-123 |
DRAWING-CROSS-REF |
DRAWING-DEFINITION |
-158 |
SITE-ASSEMBLY-FILE-APPEND |
FUNCTION-DEFINITION |
-140 |
BENDING, CUTTING |
Fixed format file structure output automatically by Isogen. |
|
CENTRELINE-LENGTH |
||
REPEATABILITY RETURN |
-
For a description of how I-Data Integrator behaves, see Output Data.
-
Only the standard template configuration file is necessary to convert Isogen report data to the required output format.
Isogen input/output file configuration
You can configure Material Control, Welding, Cut Piece and Spool Information output report files (in ASCII format) using Isogen Configuration in the I-Configure software or by editing the Isogen input (run-time) control files. The recommended method is to use Isogen Configuration to configure the required reports.
-
Bending, Repeatability Return, and Centerline Length files are fixed format and can be specified to Isogen only as an output report.
-
For more information about configuring report files, see the Isogen Configuration Help.