Find Documents to Publish - Intergraph Smart Interop Publisher - Help

Intergraph Smart Interop Publisher Help

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart Interop Publisher
PPMCategory
Help
SPFVersion_custom
2018 R1 (7.1)
Version_SPIOP
13.x(2019)

Projects view > Find Documents to Publish

Generates a list of Smart Models from the grid that either have not been published or have been modified and require re-publishing. Use this command to remove both Smart Models and Smart Drawings that have been published to SmartPlant Foundation.

  • Currently, the Find capability of this command applies only to Smart Models. If you make any changes to Smart Drawings that have been published, you must use the Update and Publish commands. For more information, see Update Smart Drawings and Publish Smart Drawings.

  • You can use the Terminate capability on both Smart Models and Smart Drawings.

Find and Publish Smart Models

  1. From the Projects view, select the project containing Smart Models to use.

  2. Right-click to select Find Documents to Publish.

  3. Log in to SmartPlant Foundation. Type your User name and Password, and then click OK.

  4. From the Select documents to publish list, select the options corresponding to the documents to publish.

    • You can quickly select the entire list by clicking Select All, or clear the entire list by clicking Clear All.

    • You can sort documents in the Select document to Publish list in ascending or descending order by the Name, Type, or Last Published columns.

  5. Click OK to accept the selections. The documents selected for publishing now display in the Documents to Publish list on the Publish dialog box.

Terminate

When you remove a Smart Model or Smart Drawing that has been published to SmartPlant Foundation, the model and drawing display in the Terminate list in the Find Documents to Publish dialog box. Use the Find Documents to Publish command, and then check each Smart Model document to remove.

  1. From the Projects view, select the project containing the Smart Models or Smart Drawings to terminate.

  2. Right-click to select Find Documents to Publish.

  3. Log in to SmartPlant Foundation. Type your User name and Password, and then click OK.

    Smart Interop Publisher displays the Find Documents to Publish dialog box.

  4. From the Terminate list, select the Smart Models and Smart Drawings to remove. You can quickly select the entire list by clicking Select All, or clear the entire list by clicking Clear All.

  5. Click OK to accept the selections.