Web Cuts for Split Members - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

Creates end-to-end web cuts for collinear members. End cuts are applied to both the bounded and bounding members.

Different web cut shapes are possible by changing the answers to user-questions on the Selection tab in the assembly connection Properties dialog box.

Name

Cross-
Sections Supported

Description

Parameters

MbrSplitWeb_NoAngle

All

A web cut is placed perpendicular to the member axis at the seam location.

MbrSplitWeb_
AngleWebSqFl

All

A web cut is placed at an offset towards bounded and angular to the member axis. Flanges can have a different seam angle.

MbrSplitWeb_
AngleWebSqFl_2

All

A web cut is placed at an offset towards bounding and angular to the member axis. Flanges can have a different seam angle.

MbrSplitWeb_
AngleWebBevelFl

All

A web cut is placed at an offset towards bounded and angular to the member axis. Flanges have a seam angle equal to that of the web.

MbrSplitWeb_
AngleWebBevelFl_2

All

A web cut is placed at an offset towards bounding and angular to the member axis on bounded. Flanges have a seam angle equal to that of the web.

MbrSplitWeb_
AngleWebAngleFl

All

A web cut is placed at an offset towards bounded and angular to the member axis. Flanges can have a different seam angle.

The cutting plane is inclined to the member axis, and the angle of the inclination can be changed using the cutVang parameter.

MbrSplitWeb_
AngleWebAngleFl_2

All

A web cut is placed at an offset towards bounding and angular to the member axis. Flanges can have a different seam angle.

The cutting plane is inclined to the member axis, and the angle of the inclination can be changed using the cutVang parameter.

MbrSplitWeb_
DistWebDistFl

All

A web cut is placed at an offset towards bounded, and slope is controlled through offsets at top and bottom points of the seam.

MbrSplitWeb_
DistWebDistFl_2

All

A web cut is placed at an offset towards bounding, and the slope is controlled through offsets at top and bottom points of the seam.

MbrSplitWeb_
OffsetWebOffsetFl

All

A web cut is placed at an offset and angular to the member axis on bounded. The web, top, and bottom flanges can have different offsets from the original seam.

MbrSplitWeb_
OffsetWebOffsetFl_2

All

A web cut is placed at an offset and angular to the member axis on bounded. The web, top, and bottom flanges can have different offsets from the original seam.

MbrSplitWeb_Tube

Circular sections

A cut is placed at the seam location.