Flange-penetrated Bottom Cuts - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

All web cuts are available for both member assembly connections and generic assembly connections.

Name

Cross-
Sections Supported

Description

Parameters

Flg Inside Hook Flange Relief Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Inside Hook Flange Relief Snipe Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Sqr Flange Relief Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Sqr Flg Rlf Outside Snp Bottom

All with no left flange

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Sqr Alg Flange Relief Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Sqr Alg Flg Rlf Outside Snp Bottom

All with no left flange

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Edge Hook Flg Rlf OutSide Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Edge Hook Flg Rlf OutSide Snp Bottom

All with no left flange

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Bottom Snipe Outside

All with no left flange

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Bottom Snipe Outside Setback

All with no left flange

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Flg Outside Snipe Bottom Offset

All with no left flange

Valid boundaries and orientations do not present a top edge to the bounding member.

Flg Snipe Face Relief Top

All

All

Flg Hook Face Relief Top

All

All

Flg Edge Hook Flange Relief Inside Bottom

All

Valid boundaries and orientations present a face and a top edge to the bounding member. The bounding member is still valid if it has a bottom edge.

Flg Bottom Outside Hook Flange Relief

All

Valid boundaries and orientations present a face and a top edge to the bounding member. The bounding member is still valid if it has a bottom edge.

FlgBottom Snipe OutSide_Tube_FR

Standard member to Tube

Standard member is bounded to a tubular member. The right side flange is cut as shown.