Size - Isogen - Reference

Isogen Isometric Drawing Options Reference

PPMProduct
Isogen
PPMCategory_custom
Reference
Version_S3D
12.1(2019)
Version_ICP
2.0(2016)
Version_ISOGEN
13.0(2016)

Specifies the size of the text characters on the drawing.

  • Small (2.1 mm) outputs small characters, 2.1 mm high.

  • Medium (2.5 mm) outputs medium-sized characters, 2.4 mm high. This is the default setting.

  • Large (2.8 mm) outputs large-sized characters, 2.8 mm high.

  • XLarge (3.5 mm) outputs extra-large characters, 3.5 mm high.

  • XXLarge (4.2 mm) outputs extra-large characters, 4.2 mm high.

  • XXXLarge (4.9 mm) outputs extra-large characters, 4.9 mm high.

  • Or User outputs characters with a height defined by Custom Size.

Defines:

Option Switch - 4, Pos 1-2
I-Configure - Drawing.Format.TextSize

Title block text, which is always output using large characters (2.8 mm) and material list text, which is controlled by properties of the material list object, are not affected by this setting.