Isometric Type - Isogen - Reference

Isogen Isometric Drawing Options Reference

PPMProduct
Isogen
PPMCategory_custom
Reference
Version_S3D
12.1(2019)
Version_ICP
2.0(2016)
Version_ISOGEN
13.0(2016)

Sets the type of isometric drawing that Isogen produces.

  • Combined produces drawings that contain Fabrication, Erection, and Offshore information.

  • Erection/Offshore produces Erection/Offshore type isometric drawings.

  • Fabrication Only produces Fabrication only isometric drawings.

  • Flat Spool produces individual flat spool isometric drawings where maximum legs are flat.

  • Spool produces individual spool isometric drawings with As-Built orientation.

  • Spool Material produces a Spool material list only, without spool graphics.

  • Combined Material produces a combined material list only, without pipeline graphics.

  • Erection Material produces an Erection material list only, without pipeline graphics.

  • Fabrication Material produces a Fabrication material list only, without pipeline graphics.

Defines:

Option Switch - 21, Pos 1-2
I-Configure - Drawing.Controls.IsometricType