Site Identifier Style - Isogen - Reference

Isogen Isometric Drawing Options Reference

PPMProduct
Isogen
PPMCategory_custom
Reference
Version_S3D
12.1(2019)
Version_ICP
2.0(2016)
Version_ISOGEN
13.0(2016)

Controls the enclosure style for site assemblies on the isometric drawing.

Click Show to display a gallery of shapes, and then select the appropriate setting.

  • None displays no box enclosure.

  • Diamond Ended displays a diamond-ended box enclosure.

  • Round Ended displays a round-ended box enclosure.

  • Triangular displays a triangular-shaped enclosure.

  • Diamond displays a diamond-shaped enclosure.

  • Rectangular displays a rectangular-shaped enclosure.

  • Circle displays a circular-shaped enclosure.

  • Double Circle displays a circular-shaped enclosure inside another circle.

  • Ellipse displays an elliptical-shaped enclosure.

Defines:

Option Switch - 79, Pos 3
I-Configure - Drawing.Format.SiteAssemblyIDEnclosure

  • The site assembly uses AText -478, default J--such as J1 or JA--to prefix the flange assembly identification.

  • The size at which the circle, double circle, and ellipse is drawn is controlled by Enclosure Size (default 2 characters). This setting defines the minimum size for the enclosure. If there are more characters than the value set, the enclosure dynamically adjusts to suit.