Displays Isogen and user-specified attributes specific to spools. Isogen attribute names and descriptions are listed below.
Attribute names and descriptions
IDENTIFIER
Specifies a unique identifier for the spool.
SPOOL-DRAWING- IDENTIFIER
Specifies a number used to identify, track, or control each individual drawing without using the pipeline reference. Only used for spool isometrics.
SPOOL-ATTRIBUTE1 to SPOOL-ATTRIBUTE10
Provides for up to 10 user-specified general-purpose spool attributes.
CENTRELINE-LENGTH
Specifies the calculated length of the spool.
CENTRE-OF-GRAVITY-X
Specifies the calculated center-of-gravity at the X position.
CENTRE-OF-GRAVITY-Y
Specifies the calculated center-of-gravity at the Y position.
CENTRE-OF-GRAVITY-Z
Specifies the calculated center-of-gravity at the Z position.
FACTOR-DIAMETER
Specifies the work erection factor that you can output to the spool information file.
SERVICE-COMMODITY-CODE
Specifies the fluid code (or similar) that Isogen can extract from the pipeline reference or read from the external data field. Do not modify this attribute.
SURFACE-AREA
Specifies the measurement of the spool surface area. The value is based on the pipe outside diameter (O/D) and the accumulated length of the pipeline. This value assists in determining paint quantity, costs, and so on.
WEIGHT
Specifies the weight of the spool.
WELD-DIAMETER
Indicates the weld diameter.