The following changes have been made to the SmartSketch Drawing Editor.
Hot Fix and Service Pack Updates
-
You can now highlight polymesh graphic objects not clipped by volume. For more information, see Highlight Dialog Box. (P2 CP:319995)
-
Updated the steps for placing a manual view for non-shell plates. See Place a Manual View for Non-Shell Plates. (P3 CP:356938)
-
Added information about the Place Label QAD command. (P3 CP:373690)
-
With the new Place Offset and Dimension command, you can quickly place multiple stacked or chained lines that are offset at a driven dimension value from a selected line. Smart 3D automatically inserts the dimension value for each placed line, and you can easily edit the value to change the line location. For more information, see Place and Dimension Offset Graphics. (P3 IM: 59276)
Version 2016 (11.0)
-
You can copy a drawing view only by using the Copy and Paste View command. For more information, see Copy and Paste View Command. (P2 CP:226825)
-
Added the Align Dimensions command to the Dimension toolbar. For more information, see Align Dimensions. (P2 IM:53182)
-
The centerline of structural members now display allowing you to define constraints and dimensions. (P2 CP:175364)
-
You can perform Update Selected on both full and cropped views. For more information, see Drawings View Explorer. (P2 CP:230723)
-
Added a new ribbon, Generic View Ribbon, to the Associate Objects to View command that allows you to specify options on a selected graphic view with a generic rule set view style. For more information, see Associate Objects to View Command. (P2 CP:244388)
-
You can now associate manually placed objects to graphic views. For more information, see Associate Graphics to Graphic View Command. (P2 CP:247816)
-
When using SmartSketch Drawing Editor with the Drawings and Reports task, the Highlight Annotations and Clear Manual Edits commands, previously custom commands, are now on the Drawings Compose toolbar. For more information, see Highlight Annotations Command and Clear Manual Edits Command. (P2 CP:255949)
-
You can now either delete a manual view placed by rule, or move the view to the UnAssigned Folder. For more information, see Delete views. (P2 CP:256645)
-
In drawings by rule, view annotations, such as the ruler and view name, are automatically adjusted in relation to the View Offset value. For more information, see View Tab (Drawing View Properties Dialog - Drawings View Explorer). (P2 CP:267889)
-
Group Selected Labels stacks selected objects without overlapping the leader lines. For more information, see Group Selected Labels. (P2 CP:265171 and P3 CP:271343)
-
You can select multiple objects with the Place a Label command, and place a group label for the objects. For more information, see Place a Label Command and Group Labels. (P3 CP:181864)
-
A new option, Treat as Paper, displays a symbol in a drawing at a 1:1 ratio. For more information, see Behavior Tab (Symbol Properties Dialog Box). (P3 CP:123847)
-
A new property, View Cone Angle, displays the cone angle value. For more information, see View Tab (Drawing View Properties Dialog - Drawings View Explorer). (P3 CP:266696)
-
Added a new Warning view state to the Drawings View Explorer. For more information, see Drawings View Explorer. (P3 CP:271093)
-
In ruleset views, if you change the view style before editing View Offset for the first time, View Offset displays the offset value as defined in the .xml template of the view style. For more information, see View Tab (Drawing View Properties Dialog). (P3 CP:272849)
-
For piping and equipment objects in plant mode, Insulation, Equipment Hole, Maintenance, and Operation aspects displaying in the 3D graphic view also display in the Sketch 2D environment. For more information, see Add Item Command and Add Potential Sketch Landmarks Command. (P4 CP:119768)
-
You can now use the PinPoint and Move commands to move an object to a location that you designate. For more information, see Move an Element with PinPoint and the Move Command. (P4 IT:49697)
-
Added notes about customizing the Sketch2DPersonalSettings.xml file. For more information, see Use Sketch2D Personal Settings Command. (P4 CP:240590, CP:245926)
-
You can place a manual view for non-shell plates in Marine mode. For more information, see Place a Manual View for Non-Shell Plates.
-
Added a new translation option, Export Transparency Threshold. For more information, see Configuration File Settings for AutoCAD Translation and Configuration File Settings for MicroStation Translation. (P4 CP:273440)
-
Added a new translation option, AutoCAD Background. For more information, see Configuration File Settings for AutoCAD Translation. (P2 IM:54575)
-
Added the Merge References setting to the MicroStation itmstn.ini configuration file. For more information, see Configuration File Settings for MicroStation Translation. (P3 IM: 49978)
-
The Create Free Space Dimension command allows you to copy a set of dimensions for one element, and move the dimension set so that it can be associated to one or more similar elements. This allows you to create multiple diagrams or drawings with similar construction without having to define dimensions for each one. You can copy dimensions and attach them to the new elements. For more information, see Copy a Dimension (see ). (P3 IM: 54209)
-
Customer Support
Anti-Piracy Statement
Copyright © 2005-2024 Hexagon AB and/or its subsidiaries and affiliates
Version 11
Published 2/2/2024 at 3:26 PM