Physical tab (Physical dialog box) - Intergraph Spoolgen - Help

Intergraph Spoolgen Help

Language
English
Product
Intergraph Spoolgen
Search by Category
Help
SmartPlant Foundation / SDx Version
10
I-Configure Version
6.0(2016)
Isogen Version
13.0(2016)
Smart Isometrics Version
2019 R1 (7.1)
Spoolgen Version
2019 R1 (9.1)

Provides information about the physical component, such as its size. Additionally, this tab of the Physical dialog box enables you to modify the end preparation of the component keypoints (the connection points). The Physical tab is divided into three panels

The Physical tab is not available for weld objects.

1 - Graphics panel

Displays a copy of the graphics that visible in the Spoolgen window. Superimposed on this view are numbers (2 and 3 in the example) that denote the position of the keypoints, which are listed in the Keypoint panel.

2 - Keypoint panel

Shows the properties (Bore and End Preparation) of all component keypoints in table format. External keypoints (connection points) are cross-referenced to the graphics panel. Using the EndPrep column, you can edit the end preparation of the relevant keypoint and override end preparation specified on a component in the Isogen file. In the previous illustration, you can change the end preparation of the elbow from BW to by clicking and selecting SC from the list.

3 - Leg panel

Displays information on the legs that define the component. Each leg has two keypoints (KP1 and KP2) and a Length.