Controls the appearance of the software and document window, such as the display of the graph paper, ruler, and scroll bar.
Controls the display.
Display as printed
Displays the drawing as it appears on paper. This option is enabled by default.
Style view scale
Controls the width of linear styles as displayed on the screen. This option is only available when Display as printed is disabled and will not apply to printed drawings.
Maximum line width
Sets the maximum width allowed for the display linear styles. This option is only available when Display as printed is disabled and will not apply to printed drawings.
Resets Style view scale and Maximum line width to their default values. This option is only available when Display as printed disabled.
Controls the window display.
Vertical Scroll Bar
Displays the vertical scroll bar of the active window.
Horizontal Scroll Bar
Displays the horizontal scroll bar of the active window.
Displays the drawing sheet tabs.
Sets options for the grid.
The grid display option must be checked from the view menu before these settings will be visible.
Displays a grid so that you can place elements with precision. The grid lines are not considered part of the document and do not print.
Aligns elements with the grid. The grid is an invisible set of lines in the document that helps you align elements. When you set Grid Snap, elements always align with the grid lines or nearest intersection of the grid lines.
Changes the format of the grid lines to either static or dynamic. When you zoom in or out, the software dynamically generates the grid lines for a dynamic grid. You can set dynamic grid lines to appear at fine, medium, or coarse levels. The grid lines appear at common major measurement increments. A dynamic grid displays index lines that intersect with the darker, solid grid lines. A static grid displays solid grid lines that do not move as you zoom in or out. The grid maintains a constant minimum spacing.
Determines the number of index grid lines, also known as minor grid lines, to be equally spaced between the major grid lines. This option is available only if you select Static in the Grid Style list box.
Sets the spacing of the major grid lines. This option is available only if you select Static in the Grid Style list box. The selected options on the Units tab of the Properties dialog box determine the units that you can use, such as inches or centimeters.
You can open the Properties dialog box by clicking Properties on the File menu.
Changes the number of dashes in the index lines, or minor grid lines, between intersections with the grid lines. This option is available only if you select Dynamic in the Grid Style list box.
Sets options for the outline of the drawing sheet.
Displays the outline of a drawing sheet so you can view its boundaries.
Use during fit
Specifies whether or not to use the sheet outline during a fit.