CL575, Geometry Standard (31999) - PDS - Reference Data

Plant Design System (PDS) Reference Data Manager (PD_Data)

PPMProductFamily
3D Design and Visualization
PPMProduct
PDS
PPMCategory
Reference Data

NOTE: The symbol "||" at the end of a description in this document

signifies that the standard has been used in preparing RDB data.

Codelist numbers have been reserved as follows:

o US practices 2-6999

o European practices 1 (DIN) 7000-11999

o European practices 2 (British) 12000-16999

o European practices 3 (Finnish, French, etc. 17000-19999

o International practices 1 (JIS) 20000-24999

o International practices 2 (Australian, etc.) 25000-27999

o Company practices 28000-31999

1 = [Blank]

US Practice Geometry Standards, 2-6999

6 = ’PDS-P1’ [REDE, RWELD, RPAD, BLSPC_>24"_API+/- thk varies,

BLSPO_>24"_API+/- thk varies]

7 = ’PDS-P2’ [BLSPC_>24"__API+/-_0.375"thk, BLSPO_>24"_API+/-_0.375"th

8 = ’PDS-P3’ [BLSPC_>24"_MSS+/- thk varies, BLSPO_>24"_MSS+/- thk vari

11 = ’PDS-I1’ [BLSPC_>24"_API+/-_1.5"thk, BLSPO_>24"_API+/-_1.5"thk]

12 = ’PDS-I2’ [BLPAD_>24"_MSS+/-_0.75"thk, BLSPA_>24"_MSS+/-_0.75"thk]

13 = ’PDS-I3’

16 = ’PDS-Op1’

17 = ’PDS-Op2’

18 = ’PDS-Op3’

31 = ’ANSI-B16.1’ [Cast Iron Pipe Flanges and Flanged Fittings ||]

33 = ’ANSI-B16.3’ [Malleable Iron Threaded Fittings ||]

34 = ’ANSI-B16.4’ [Cast Iron Threaded Fittings ||]

35 = ’ANSI-B16.5’ [Pipe Flanges and Flanged Fittings ||]

39 = ’ANSI-B16.9’ [Steel Beveled End Fittings ||]

40 = ’ANSI-B16.10’ [Dimensions of Ferrous Valves ||]

41 = ’ANSI-B16.11’ [Forged Steel Socketwelded and Threaded Fittings ||]

42 = ’ANSI-B16.12’ [Cast Iron Threaded Drainage Fittings ||]

44 = ’ANSI-B16.14’ [Ferrous Pipe Plugs and Bushings]

45 = ’ANSI-B16.15’ [Cast Bronze Threaded Fittings ||]

50 = ’ANSI-B16.20’ [RTJ Gaskets and Grooves ||]

51 = ’ANSI-B16.21’ [Flat Gaskets for Pipe Flanges ||]

52 = ’ANSI-B16.22’ [Wrought Copper Solder Joint Pressure Fittings ||]

53 = ’ANSI-B16.23’ [Cast Copper Solder Joint Drainage Fittings ||]

54 = ’ANSI-B16.24’ [Bronze Pipe Flanges and Flanged Fittings ||]

55 = ’ANSI-B16.25’ [Beveled End Preparation]

56 = ’ANSI-B16.26’ [Cast Copper Alloy Fittings for Flared Copper Tubing]

58 = ’ANSI-B16.28’ [Steel Beveled End Short Radius Elbows and Returns ||]

59 = ’ANSI-B16.29’ [Wrought Copper Solder Joint Drainage Fittings]

64 = ’ANSI-B16.34’ [Valves Flanged and Beveled Ends ||]

66 = ’ANSI-B16.36’ [Steel Orifice Flanges ||]

69 = ’ANSI-B16.39’ [Malleable Iron Threaded Pipe Unions ||]

72 = ’ANSI-B16.42’ [Ductile Iron Pipe Flanges and Flanged Fitting ||]

73 = ’ANSI-B16.43’ [Wrought Copper Alloy Solder Joint Fittings for Solvent

Drainage Systems]

81 = ’ANSI-B18.2.1’ [Square and Hex Bolts and Screws ||]

82 = ’ANSI-B18.2.2’ [Square and Hex Nuts]

100 = ’ANSI-B36.10M’ [Welded and Seamless Wrought Steel Pipe ||]

109 = ’ANSI-B36.19M’ [Stainless Steel Pipe ||]

114 = ’API-5A’ [Casing, Tubing and Drill Pipe]

115 = ’API-5B’ [Casing, Tubing and Line Pipe Threads]

119 = ’API-5L’ [Line Pipe ||]

120 = ’API-5LE’ [Polyethylene Line Pipe ||]

122 = ’API-5LP’ [Thermoplastic Line Pipe ||]

124 = ’API-5LS’ [Spiralweld Line Pipe ||]

126 = ’API-5LU’ [Ultra High Test Heat Treated Line Pipe ||]

127 = ’API-5LX’ [High Test Line Pipe]

131 = ’API-6A’ [Wellhead Equipment]

132 = ’API-6AB’ [30,000 PSI Flanged Wellhead Equipment]

135 = ’API-6D’ [Pipeline Valves, End Closures, Connectors and Swivels]

141 = ’API-526’ [Flanged Steel Safety Relief Valves]

145 = ’API-590’ [Steel Line Blanks ||]

146 = ’API-590Z1’ [Steel Line Blanks - with 0.125" CA ||]

147 = ’API-590Z2’ [Steel Line Blanks - with 0.25" CA ||]

153 = ’API-593’ [Ductile Iron Plug Valves]

154 = ’API-594’ [Wafer Check Valves]

155 = ’API-595’ [Cast Iron Gate Valves]

157 = ’API-597’ [Steel Venturi Gate Valves]

159 = ’API-599’ [Steel Plug Valves]

160 = ’API-600’ [Steel Gate Valves ||]

161 = ’API-601’ [Metallic Gaskets for Raised Face Pipe Flanges and

Flanged Connections ||]

162 = ’API-602’ [Compact Steel Gate Valves]

163 = ’API-603’ [Class 150 Cast Flanged End Gate Valves]

164 = ’API-604’ [Ductile Iron Gate Valves]

165 = ’API-605’ [Large Diameter Carbon Steel Flanges ||]

166 = ’API-606’ [Compact Carbon Steel Gate Valves]

169 = ’API-609’ [Butterfly Valves Lug and Wafer Type]

171 = ’ASTM-A74’ [Cast Iron Soil Pipe and Fittings]

172 = ’ASTM-C76’ [Reinforced Concrete Culvert, Storm Drain and Sewer Pipe]

173 = ’ASTM-C700’ [Extra Strength and Standard Strength Clay Pipe and

Perforated Clay Pipe]

174 = ’ASTM-D2464’ [Threaded PVC Plastic Pipe Fittings Schedule 80]

176 = ’ASTM-D2466’ [Socket-Type PVC Plastic Pipe Fittings Schedule 40 ||]

177 = ’ASTM-D2467’ [Socket-Type PVC Plastic Pipe Fittings Schedule 80 ||]

179 = ’AWWA-C106’ [Cast Iron Pipe]

181 = ’AWWA-C110’ [Ductile Iron and Gray Iron Fittings 3"-48" ||]

184 = ’AWWA-C115’ [Ductile Iron and Gray Iron Pipe]

186 = ’AWWA-C151’ [Ductile Iron Pipe ||]

190= ’AWWA-C207 Cl.B & D, ring’

[Steel slip-on flanges CL86, CL150, CL175 ||]

191= ’AWWA-C207 Cl.B & D, hub’

[Steel slip-on flanges CL86, CL150, CL175 ||]

192= ’AWWA-C207 Cl.E, hub’

[Steel slip-on flanges CL275 ||]

193 = ’AWWA-C208’ [Steel Water Pipe Fittings]

200 = ’AWWA-C500’ [Gate Valves 3"-48" for Water and Sewage Systems]

204 = ’AWWA-C504’ [Rubber Seated Butterfly Valves]

206 = ’AWWA-C506’ [Backflow Prevention Devices-Check Valves]

207 = ’AWWA-C507’ [Ball Valves]

208 = ’AWWA-C508’ [Swing Check Valves for Water Works Service 2"-24"]

220 = ’AWWA-C900’ [PVC Pipe 4"-12" for Water]

221 = ’AWWA-C901’ [Polyethylene Pipe, Tubing and Fittings 1/2"-3" for Water

222 = ’AWWA-C902’ [Polybutylene Pipe, Tubing and Fittings 1/2"-3" for Water

230 = ’AWWA-C950’ [Glass-Fiber Reinforced Pressure Pipe]

235 = ’PFI-ES-24’ [Pipe Bending Tolerances ||]

243 = ’ISA-S75.03’ [Face to Face Dimensions Globe Control Valves]

244 = ’ISA-S75.04’ [Face to Face Dimensions Flangeless Control Valves]

252 = ’MSS-SP-42’ [CL150 Valves ||]

253 = ’MSS-SP-43’ [Stainless Steel Buttwelding Fittings]

254 = ’MSS-SP-44’ [Steel Pipe Line Flanges ||]

255 = ’MSS-SP-51’ [CL150LW Cast Flanges and Flanged Fittings]

268 = ’MSS-SP-58’ [Pipe Hangers and Supports]

277 = ’MSS-SP-67’ [Butterfly Valves]

278 = ’MSS-SP-68’ [High Pressure-Offset Seat Butterfly Valves]

282 = ’MSS-SP-72’ [Ball Valves with Flanged or Beveled Ends]

285 = ’MSS-SP-75’ [Wrought Beveled End Fittings]

288 = ’MSS-SP-78’ [Cast Iron Plug Valves]

289 = ’MSS-SP-79’ [Socketwelding Reducing Inserts]

290 = ’MSS-SP-80’ [Bronze Gate, Globe, Angle & Check Valves]

291 = ’MSS-SP-81’ [Flanged, Wafer Knife Gate Valves]

293 = ’MSS-SP-83’ [Carbon Steel Socketwelded and Threaded Pipe Unions ||]

295 = ’MSS-SP-88’ [Diaphragm Valves]

297 = ’MSS-SP-95’ [Swage Nipples and Bull Plugs ||]

298 = ’NFPA-1963’ [Screw Threads and Gaskets for Fire Hose connections]

300 = ’ASME BPE-97’

[Geometry standards that follow apply to specific manufacturers.

If one of these standards is used to define a component, the

following information will be shown in brackets to the right of the

geometry standard:

o For valves: the applicable model codes and vendor’s designations

o For fittings: the applicable model codes will be shown unless

the vendor’s designation is required to differentiate between

components requiring a different geometry standard to assign them

to the proper data table.

1000 = ’Adamson 1’

1001 = ’Adams 1’

1025 = ’Aitken 1’ [BLPAD; BLSPA; TDRA; TDRB; TDRBW ||]

1026 = ’Aitken Z1’ [BLPAD; BLSPA - with 0.125" CA ||]

1027 = ’Aitken Z2’ [BLPAD; BLSPA - with 0.25" CA ||]

1050 = ’Allied Pipe Products 1’

1075 = ’Aldo Colombo 1’

1100 = ’Aloyco 1’ [GATR-Fig_114; GATR-Fig_114DB; GATR-Fig_114EB; GATR-Fig_124;

GATR-Fig_2214A; GLOR-Fig_2310A; GLOR-Fig_2314A; GLOR-Fig_314; GLOR-Fig_31

GLOR-Fig_314EB; GLOR-Fig_504; CKLR-Fig_554; CKLR-Fig_2554A; CKSR-Fig_2374

CKSR-Fig_374; TKDR-Fig_751 ||]

1101 = ’Aloyco 2’ [GATR-Fig_2110; GATR-Fig_2114 ||]

1125 = ’American Darling 1’ [H3W1-Fig_B-50-B ||]

1130 = ’American DI Pipe’ [PIPE; L; LRB ||]

1150 = ’American Valve 1’

1175 = ’Amri 1’

1200 = ’Anaconda 1’

1225 = ’Anderson Greenwood 1’

1250 = ’Anvil 1’

1275 = ’A.O.Smith 1’

1300 = ’Apollo 1’

1325 = ’Argus 1’

1350 = ’Armstrong 1’ [S51AC-Fig_K1SC; S70AC-Fig_2011; S70BC-Fig_2011 ||]

1375 = ’Asahi/American 1’

1400 = ’Babbitt 1’

1425 = ’Babcock and Wilcox 1’

1450 = ’Badger Meters 1’

1475 = ’Bailey Co 1’

1500 = ’Balon 1’

1525 = ’Basic Engineering 1’

1550 = ’Bestobel 1’

1560 = ’Bete 1’ [SSP1-Series_N ||]

1575 = ’Bonney Forge 1’ [GAT-Fig_9HLF-10; GATR-Fig_9H-10; GATR-Fig_9W-10;

GATEXB-Fig_VLL-10; GATEXB-Fig_VOLL-10; GLOR-Fig_HL-30; GLOR-Fig_9HL-30;

GLOR-Fig_9WL-30; CKLR-Fig_9HL-40; CKLR-Fig_9HL-50; CKLR-Fig_9HL-60;

CKLR-Fig_9WL-40; CKLR-Fig_9WL-50; CKLR-Fig_9WL-60; CKLR-Fig_HL-40;

CKLR-Fig_9HLF-40; CKLRY-Fig_9Y-40; CKLRY-Fig_25Y-40; CAPOT; UN; L; LRB;

SWOL; WOL; SOL; TOL; NOL; EOLLR; EOLSR; LOL ||]

1576 = ’Bonney Forge 2’ [GATR-Fig_9H-10; GATR-Fig_25W-10; GLOR-Fig_9HL-30;

GLOR-Fig_9WL-30; GLOR-Fig_25W-30; GLOY-Fig_25Y-30; CKLR-Fig_9HL-40;

CKLR-Fig_9HL-50; CKLR-Fig_9HL-60; CKLR-Fig_9WL-40; CKLR-Fig_9WL-50;

CKLR-Fig_9WL-60 ||]

1577 = ’Bonney Forge 3’ [GATF-Fig_H-10; GATF-Fig_W-10; GATR-Fig_HL-10;

GATR-Fig_WL-10; CKLR-Fig_HL-40; CKLR-Fig_WL-40 ||]

1585 = ’Boots & Coots 1’ [MN1-Spectrum_Allpha_6235 ||]

1590 = ’Bray 1’

1600 = ’Brooks Meters 1’

1625 = ’Cameron 1’

1650 = ’Carbone 1’

1675 = ’Ciba-Geigy 1’

1700 = ’Clark Reliance 1’

1725 = ’Clayton Automatic Valves 1’ [CKBP-Model_D; FLO-Series_427-01 ||]

1750 = ’Clayton Mark 1’

1775 = ’Clow 1’

1800 = ’Cochrane 1’

1825 = ’Condren 1’

1850 = ’Continental Emsco 1’

1875 = ’Cooper Valve 1’

1900 = ’Crane 1’ [GATF-Fig_3904U; GATR-Fig_424; GATR-Fig_431UB; BALR-Fig_9302;

GLOF-Fig_3944U; GLOR-Fig_14 1/2P; GLOR-Fig_70; GLOY-Fig_7189; NEE-Fig_88;

CKS-Fig_373;CKLF-Fig_3973U; CKSR-Fig_36; CKSR-Fig_137; FOOT-Fig_394;

FOOT-Fig_395; FLWN; FSO; L; LRB ||]

1925 = ’Crosby 1’

1950 = ’Daniel 1’

1975 = ’Demco 1’

2000 = ’Dezurik 1’

2025 = ’Dixon 1’

2050 = ’Dresser 1’

2075 = ’Dover 1’

2100 = ’DOW 1’ [TRI-Lining_SL; TRI-Lining_PPL, TRI-Lining_KL ||]

2150 = ’Duo Seal 1’

2155 = ’Dur-O-Lock 1’ [CPL ||]

2175 = ’Durco 1’

2200 = ’Elkhart 1’

2225 = ’Enpro 1’

2250 = ’Epsco 1’

2275 = ’Everest 1’

2300 = ’Fabri-Valve 1’ [KNF-Fig_36 ||]

2325 = ’Fairbanks 1’

2350 = ’Fasani 1’

2375 = ’Fetterolf 1’

2400 = ’Fibercast 1’

2425 = ’Fike 1’

2450 = ’Fisher 1’

2475 = ’Flexitallic 1’

2500 = ’Flowline 1’

2525 = ’FMC 1’

2550 = ’Foxboro 1’

2575 = ’Garlok 1’

2600 = ’General 1’

2625 = ’Geosource 1’

2650 = ’Gestra 1’

2660 = ’Gladding McBean 1’ [REDC; E45; E90; M451; M452; L ||]

2675 = ’Graylock 1’

2700 = ’Grinnell 1’ [BALR-Fig_3022; CAPOT; UNO; E45U; E90RST; TOUB; TOUR ||]

2715 = ’Grinnell Fire Prot 1’ [DEL-Model_A-4; SSP-Mulsifyre-Projector ||]

2725 = ’Grove 1’

2750 = ’Gulf 1’

2775 = ’Hammond 1’

2800 = ’Hancock 1’ [BDA-Fig_5505W ||]

2825 = ’Haws 1’ [SSEW1-Fig_8309; SSEW1-Fig 8309CRP ||]

2850 = ’Heaton 1’

2860 = ’Hex 1’

2875 = ’Hindle-Hamer 1’

2900 = ’Hitachi 1’

2915 = ’Hoke 1’

2925 = ’Hydril 1’

2950 = ’Imperial Eastman 1’

2975 = ’Ishida 1’

2980 = ’ITT 1’

3000 = ’Jacoby Tarbox 1’

3025 = ’Jamesbury 1’ [BALR-Style_B; BALSP-Type_530S; BAL3W-Style_AM150FD;

BAL3W-Style_DM150FD ||]

3026 = ’Jamesbury 2’ [BALR-Style_A ||]

3027 = ’Jamesbury 3’ [BALR-Type_2000_Brass ||]

3028 = ’Jamesbury 4’ [BALF-Type_4000; BALR-Type_4000 ||]

3050 = ’Jenkins 1’

3075 = ’Jerguson 1’

3100 = ’Judd Valve 1’

3125 = ’Kamyr-Neles 1’

3150 = ’Kemp 1’

3175 = ’Kennedy 1’

3200 = ’Keystone 1’

3225 = ’Kinka Kikai 1’

3250 = ’Kitz 1’

3275 = ’KTM 1’

3300 = ’Kubota 1’

3325 = ’L & M Valve 1’

3350 = ’Ladish 1’ [CAPOT; L; LRB ||]

3375 = ’Lamons 1’

3400 = ’Lukens 1’

3425 = ’Lunkenheimer 1’

3445 = ’Mac-Iron 1’

3450 = ’Magnetrol 1’

3475 = ’Malbranque 1’

3500 = ’Maloney 1’

3525 = ’Mark Controls/Centerline 1’ [BFYLP-Series_A; BFYLP-Series_LT;

BYFLP-Series_504 ||]

3550 = ’Mark Controls/Flowseal 1’ [BFYHP-Style_1LB ||]

3575 = ’Mark Controls/Marpac 1’

3600 = ’Mark Controls/Pacific 1’ [GATSP-Fig_21555; GATSP-Fig_55509; GATSP-Fig_5

GLOSP-Fig_56009; GLOSP-Fig_56015; CKSSP-Fig_58809-5-WE; CKSSP-Fig_58815-7-WE;

CKST-Fig_160S ||]

3625 = ’Marlin 1’

3650 = ’Marwin 1’

3675 = ’Masoneilan 1’

3700 = ’Media 1’ [BFYLP]

3725 = ’Milwaukee 1’

3750 = ’Mueller/Muessco Brass 1’

3775 = ’Mueller/Muessco Steam Specialty 1’ [S51AC-Fig_761WE; S51AC-Fig_862BC;

S51AC-Fig_762 ||]

3800 = ’Navco 1’

3825 = ’Nells 1’

3850 = ’Newco 1’

3860 = ’Nibco 1’

3875 = ’Nicholson 1’ [S78AC-Fig_N302L ||]

3900 = ’Nippon-Benkan 1’ [BW fittings above 48" ||]

3925 = ’Nupro 1’

3950 = ’OPW 1’

3975 = ’Orbit 1’

4000 = ’Oseco 1’

4025 = ’Pan Korea 1’

4030 = ’Parker CPI 1’

4050 = ’Parks Cramer 1’

4075 = ’Peabody Dore 1’

4100 = ’Penberthy 1’

4125 = ’Penn-AirCheck 1’

4150 = ’Persta 1’

4175 = ’Petrolvalves 1’

4200 = ’Posi-Seal 1’ [BFYHP-Model A31; BFYHP-Model A21; BFYHP-Model A11 ||]

4225 = ’Powhatan 1’ [HOS-No_18-217; HOSA-No_18-157; HRST1-No_30-333 ||]

4250 = ’Powell 1’

4275 = ’Pratt 1’ [BFYLP-Model_PIVA & IBV-FM4; Groundhog ||]

4300 = ’Premafu 1’

4325 = ’Protectoseal 1’

4335 = ’R & G Sloane’ [BALF-Fig_1081; CAPOT; FS; INSR1]

4350 = ’Resistoflex 1’ [PIN-Code_R6000D1 ||]

4375 = ’Ring-O 1’

4400 = ’Rockwell 1’ [DIA-Type_STD_Unlined ||]

4425 = ’Rockwell/Edwards 1’ [GLOA-Fig_849; GLOA-Fig_849Y; GLOYR-Fig_848;

GLOYR-Fig_848Y; GLOYR-Fig_1048; GLOYR-Fig_1048Y; CKLRY-Fig_36178;

CKLRY-Fig_36278; NEE-Fig_4152; CKST-Fig_302; CKST-Fig_302Y; CKAST-Fig_303

CKAST-Fig_303Y; CKAST-Fig_869; CKAST-Fig_869Y; CKYST-Fig_302; CKYST-Fig_6

BDY-Fig_1641; ||]

4426 = ’Rockwell/Edwards 2’ [CKLRY-Fig_832Y; GLOY-Fig_36124; GLOY-Fig_36128;

CKLRY-Fig_1032Y; CKAST-Fig_605Y; CKAST-Fig_607Y; BDA-Fig_1643Y ||]

4427 = ’Rockwell/Edwards 3’ [GLOY-Fig_7514Y ||]

4450 = ’Rockwell/McCanna 1’ [BAL3W-Type_500-3WAY ||]

4475 = ’Rockwell/Nordstorm 1’ [PLUVP-Fig_4169; PLU3W-Fig_3813; PLU3W-Fig_4812;

PLU3W-Fig_4813; PLU3W-Fig_5115; PLU3W-Fig_5119; PLU3W-Fig_5215;

PLU3W-Fig_5219; PLU4W-Fig_3823; PLU4W-Fig_4822; PLU4W-Fig_5125;

PLU4W-Fig_5129 ||]

4500 = ’R P & C 1’

4520 = ’Sarco 1’

4522 = ’Saunders 1’

4525 = ’Sella 1’

4550 = ’Serck Audco 1’

4575 = ’Serfilco 1’

4600 = ’Shoritsu 1’

4625 = ’Smith 1’ [GATF-Fig_888; GATF-Fig_5870; GATR-Fig_800; GATR-Fig_870;

GATR-Fig_1500; GATR-Fig_1570; GATEX-Fig_811 & 812 MPE/THD; GATEX-Fig_876

& 877 MPE/THD; GATEXB-Fig_874 & 875 OLET/THD; GATXBA-Fig_874 & 875 OLET/S

GATXBB-Fig_874 & 875 OLET/THD; GLOR-Fig_G80; GLOR-Fig_G87; GLOR-Fig_G150;

GLOR-Fig_G157; CKLR-Fig_B80; CKLR-Fig_C80; CKLR-Fig_C150; CKLR-Fig_SB80;

CKLR-Fig_SC80 ||]

4626 = ’Smith 2’ [GATEX-Fig_813 & 814 MPE/SW; GATEX-Fig_878 & 879 MPE/SW ||]

4650 = ’Spraying Systems 1’

4675 = ’Spirax Sarco 1’

4700 = ’Stanco 1’

4725 = ’Standard Fittings 1’ [CAPOT; SWGC; SWGE ||]

4750 = ’Stang Hydronics 1’ [M1-Fig BB0309-21 w/shapertip nozzle; ME1-Fig BB3561

4751 = ’Stang Hydronics 2’ [M1-Fig_BB0309-21 w/fog nozzle; ME1-Fig B22999 ||]

4752 = ’Stang Hydronics 3’ [ME1-Fig_BB3561 composite, w/monitor nozzle ||]

4753 = ’Stang Hydronics 4’ [ME1-Fig_BB3377 composite, w/monitor nozzle ||]

4775 = ’Stockham 1’

4800 = ’Strahman 1’

4825 = ’Swagelok 1’

4850 = ’Tapco 1’

4875 = ’Taylor 1’

4900 = ’Taylor Forge 1’

4901 = ’Taylor Forge 2, Rev 1957’ [L; S-STD WT ||]

4925 = ’Teledyne Farris 1’

4950 = ’Texas Bolt 1’

4975 = ’Thevignot 1’

5000 = ’Titeflex 1’

5025 = ’TK 1’

5050 = ’TKM 1’ [GAT-Fig_100 ||]

5060 = ’Top Line 1’

5075 = ’Triangle 1’

5085 = ’Tri-Clover 1’

5100 = ’Truflo 1’

5125 = ’TRW/Mission 1’ [||]

5150 = ’Tubeturn 1’ [FWN; FEWN; FOWNA; FOWNB; CAPBV; E453D; E90LT; E903D; L; SA

5175 = ’Tufline 1’

5200 = ’Tyler 1’ [CPL; REDC; E45LT; E90LT; L ||]

5225 = ’Valvotecnic 1’

5250 = ’Vanessa 1’

5275 = ’Velan 1’ [S3AC-Fig_N675 ||]

5300 = ’Victaulic 1’

5325 = ’Viking 1’

5350 = ’Vitas 1’

5375 = ’Vogt 1’ [GATR-Series_15373; GLOR-Series_15141; CKLR-Series_15701;

NEE-Series_22461; NEE-Series_SW22461; CAPOT; UN; E90U; E90ST; L ||]

5400 = ’Wada 1’

5425 = ’Wallworth 1’

5450 = ’Watts Regulator 1’

5475 = ’Weco 1’

5500 = ’WFI 1’

5525 = ’Winston 1’ [S49AC-T-Strainer Type-59 W/flg’d cover; S53AC-Basket-Strain

Fig 51-WIP W/CL150 flg’d cover & 3/4" SWE drain||]

5535 = ’Wirt & Knox 1’

5550 = ’WKM 1’

5575 = ’Worcester 1’

5600 = ’Yarway 1’ [CKAR-Fig_5301; CKAR-Fig_5302; BDA-Fig_6909-C; BDY-Fig_6911-C

TKDR-Fig_8106 ||]

5625 = ’Yoneki 1’

5650 = ’Zurn 1’

o European practices 1 (DIN) 7000-11999

General Specifications

7000 = ’DIN 2401-1 Pressure, nominal’

7001 = ’DIN 2401-2 Pressure, nominal’

7002 = ’DIN 2402 Diameter,nominal’

Pipes

7010 = ’DIN 2448’ ;Steel pipes, seamless

7011 = ’DIN 2458’ ;Steel pipes, welded

7012 = ’DIN 2440’ ;Threaded pipes, medium weight

7013 = ’DIN 2441’ ;Threaded pipes, heavy weight

7014 = ’DIN 2442’ ;Threaded pipes, spec. qualty

7015 = ’DIN 2445’ ;Seamless steel pipes,dyn. load

7016 = ’DIN 2460’ ;Steel pipes for water

7017 = ’DIN 2462’ ;Seamless ferritic steel pipes

7018 = ’DIN 2463’ ;Seamless austenitic steel pipes

7019 = ’DIN 2391’ ;Seamless precision steel tubes

7020 = ’DIN 2393’ ;Welded precision steel tubes

7025 = ’DIN 2848’ ;Flanged lined pipes

7026 = ’DIN 2873’ ;Flanged lined enamelled pipes

7030 = ’DIN 2462’ ;Seamless stainless steel tubes

7031 = ’DIN 2463’ ;Welded austenitic steel pipes and tubes

7040 = ’DIN 8062’ ;Pipes of unplasticized polyvinyl chlor.

7041 = ’DIN 8077’ ;Polypropylen (PP) pipes

Flanges

7100 = ’DIN 2530’ ;Cast iron flanges, PN 2,5

7101 = ’DIN 2531’ ;Cast iron flanges, PN 6

7102 = ’DIN 2532’ ;Cast iron flanges, PN 10

7103 = ’DIN 2533’ ;Cast iron flanges, PN 16

7104 = ’DIN 2534’ ;Cast iron flanges, PN 25

7105 = ’DIN 2535’ ;Cast iron flanges, PN 40

7106 = ’DIN 2543’ ;Cast steel flanges, PN 16

7107 = ’DIN 2544’ ;Cast steel flanges, PN 25

7108 = ’DIN 2545’ ;Cast steel flanges, PN 40

7109 = ’DIN 2546’ ;Cast steel flanges, PN 64

7110 = ’DIN 2547’ ;Cast steel flanges, PN 100

7111 = ’DIN 2548’ ;Cast steel flanges, PN 160

7112 = ’DIN 2549’ ;Cast steel flanges, PN 250

7113 = ’DIN 2550’ ;Cast steel flanges, PN 320

7114 = ’DIN 2551’ ;Cast steel flanges, PN 400

7115 = ’DIN 2558’ ;Plain face oval screwed flange PN 6

7116 = ’DIN 2561’ ;Oval screwed flange w/ socket PN 10,16

7117 = ’DIN 2565’ ;Screwed flange PN 6 rund

7118 = ’DIN 2566’ ;Screwed flange PN 10,16

7119 = ’DIN 2567’ ;Screwed flange PN 25,40

7120 = ’DIN 2568’ ;Screwed flange PN 64

7121 = ’DIN 2569’ ;Screwed flange PN 100

7122 = ’DIN 2630’ ;Welding neck flange PN 1

7123 = ’DIN 2631’ ;Welding neck flange PN 6

7124 = ’DIN 2632’ ;Welding neck flange PN 10

7125 = ’DIN 2633’ ;Welding neck flange PN 16

7126 = ’DIN 2634’ ;Welding neck flange PN 25

7127 = ’DIN 2635’ ;Welding neck flange PN 40

7128 = ’DIN 2636’ ;Welding neck flange PN 64

7129 = ’DIN 2637’ ;Welding neck flange PN 100

7130 = ’DIN 2638’ ;Welding neck flange PN 160

7131 = ’DIN 2628’ ;Welding neck flange PN 250

7132 = ’DIN 2629’ ;Welding neck flange PN 320

7133 = ’DIN 2627’ ;Welding neck flange PN 400

7134 = ’DIN 2673’ ;Loose flange w/ wldg neck PN 10

7135 = ’DIN 2667’ ;Loose flange w/ wldg neck PN 160

7136 = ’DIN 2668’ ;Loose flange w/ wldg neck PN 250

7137 = ’DIN 2669’ ;Loose flange w/ wldg neck PN 320

7138 = ’DIN 2573’ ;Flange, soldering or wldg PN 6

7139 = ’DIN 2576’ ;Flange, soldering or wldg PN 10

7140 = ’DIN 2641’ ;Flange, lapped, plain collar PN 6

7141 = ’DIN 2642’ ;Slip-on flange, upturned wldg PN 10

7142 = ’DIN 2652’ ;Flange, lapped, plain collar PN 6

7143 = ’DIN 2653’ ;Flange, lapped, plain collar PN 10

7144 = ’DIN 2655’ ;Flange, lapped, plain collar PN 25

7145 = ’DIN 2656’ ;Flange, lapped, plain collar PN 40

7146 = ’DIN 2501’ ;Flanges, Dimensions

7147 = ’DIN 2512’ ;Flanges, tongue & groove

7148 = ’DIN 2512’ ;Rings

7149 = ’DIN 2513’ ;Flanges, projection & recess

7150 = ’DIN 2514’ ;Projection w/ groove & recess

7160 = ’DIN 2527’ ;Flange, blind PN 6,10,16,25,40,64,100

7161 = ’DIN 2848’ ;Reducing flanges, lined

7162 = ’DIN 2873’ ;Reducing and blind flanges, enamelled

Elbows

7200 = ’DIN 2605’ ;Tube bends f. butt wldg

7201 = ’DIN 2606’ ;Tube bends, steel 5d

7202 = ’DIN 2916’ ;Bending radii, seaml.& wld pipes

7203 = ’DIN 2983’ ;Threaded steel pipe fittings, bends

7204 = ’DIN 2987’ ;Threaded steel pipe fittings, elbows

7205 = ’DIN 2987’ ;Threaded steel pipe fittings, elbows, reduced

7206 = ’DIN 2950’ ;Malleable cast iron fittings, elbows

7210 = ’DIN 2605-1’ ;Elbows, bend radius 1d, standard 12.85

7211 = ’DIN 2605-1’ ;Elbows, bend radius 1.5d, standard 12.85

7212 = ’DIN 2605-1’ ;Elbows, bend radius 2.5d, standard 12.85

7213 = ’DIN 2605-1’ ;Elbows, bend radius 5d, standard 12.85

7214 = ’DIN 2605-1’ ;Elbows, bend radius 10d, standard 12.85

7215 = ’DIN 2605-2’ ;Elbows, bend radius 1d, standard 12.85

7216 = ’DIN 2605-2’ ;Elbows, bend radius 1.5d, standard 12.85

7217 = ’DIN 2605-2’ ;Elbows, bend radius 2.5d, standard 12.85

7218 = ’DIN 2605-2’ ;Elbows, bend radius 5d, standard 12.85

7219 = ’DIN 2605-2’ ;Elbows, bend radius 10d, standard 12.85

7230 = ’DIN 2848’ ;Flanged lined steel fittings, Bends

7231 = ’DIN 2873’ ;Flanged steel fittings enamelled, Bends

7240 = ’DIN 16962’ ;Polypropylen (PP) components, Pipe bends B1,B2

7241 = ’DIN 16962’ ;Polypropylen (PP) components,Elb. W1,W2,part 6

7242 = ’DIN 16962’ ;Polypropylen (PP) components,Elb.W3,W4,part 10

Reducers

7300 = ’DIN 2616’ ;Steel fittings, reducers

7301 = ’DIN 2990’ ;Threaded steel pipe fittings, Bushings

7302 = ’DIN 2988’ ;Threaded steel pipe fittings, Reducing sockets

7303 = ’DIN 2950’ ;Malleable cast iron fittings, Reducing sockets

7304 = ’DIN 2950’ ; - " - , male and female connections, Bushings

7310 = ’DIN 2848’ ;Flanged lined steel fittings, Reducers

7311 = ’DIN 2873’ ;Flanged steel fittings enamelled, Reducers

7320 = ’DIN 16962’ ;Polypropylen (PP) components, Red. R1, part 9

7321 = ’DIN 16962’ ;Polypropylen (PP) components, Red. NRGI, part 9

7322 = ’DIN 16962’ ;Polypropylen (PP) components, Red. R2, part 10

7323 = ’DIN 16962’ ;Polypropylen (PP) components, Red. R3, part 11

Branches

7400 = ’DIN 2615’ ;Butt wldg steel fittings;T

7401 = ’DIN 2618’ ;Welding saddles, short

7402 = ’DIN 2618’ ;Welding saddles, long

7403 = ’DIN 2619’ ;Bends for welding

7404 = ’DIN 2987’ ;Threaded steel fittings;cross;T

7405 = ’DIN 2987’ ;Threaded steel fittings;cross;T;redcd

7406 = ’DIN 2950’ ;Malleable cast iron fittings, Tees, Crosses

7410 = ’DIN 2848’ ;Flanged lined steel fittings, T

7411 = ’DIN 2873’ ;Flanged steel fittings enamelled, T

7420 = ’DIN 16962’ ;Polypropylen (PP) components, Tee, T1,T5 part 2

7421 = ’DIN 16962’ ;Polypropylen (PP) components, Tee, T2, part 7

7422 = ’DIN 16962’ ;Polypropylen (PP) components, Tee, T2G, part 7

7423 = ’DIN 16962’ ;Polypropylen (PP) components, Tee, T3, part 10

Caps

7500 = ’DIN 2617’ ;Butt wldg steel fittings, Caps

7501 = ’DIN 2991’ ;Threaded steel fittings, Caps

7502 = ’DIN 2950’ ;Malleable cast iron fittings, Caps

7510 = ’DIN 16962’ ;Polypropylen (PP) components, Cap K1, part 8

7511 = ’DIN 16962’ ;Polypropylen (PP) components, Cap K2, part 10

Other fittings

7600 = ’DIN 2981’ ;Threaded steel fittings with long screw thread

7601 = ’DIN 2982’ ;Threaded steel fittings, Parallel Nipples

7602 = ’DIN 2982’ ;Threaded steel fittings, Taper Nipples

7603 = ’DIN 2986’ ;Threaded steel fittings, Sockets

7604 = ’DIN 2990’ ;Threaded steel fittings, Hexagon Nipples

7605 = ’DIN 2991’ ;Threaded steel fittings, Plain plugs

7606 = ’DIN 2993’ ;Threaded steel fittings, Pipe unions

7610 = ’DIN 2950’ ;Malleable cast iron fittings, Sockets, Unions,

;Nipples, Plugs etc.

7620 = ’DIN 16962’ ;Polypropylen (PP) components, Soc. M1,MGI, p. 8

7630 = ’DIN 2848’ ;Flanged lined steel fittings, spacers

7631 = ’DIN 2873’ ;Flanged lined steel fittings enamelled, spacers

Bolts and Nuts

8000 = ’DIN 934’

8001 = ’DIN 931’

Gaskets

8100 = ’DIN 2690’ ;Gasket for plain face C

8101 = ’DIN 2691’ ;Gasket for tongue & groove

8102 = ’DIN 2692’ ;Gasket for recessed faces

8103 = ’DIN 2693’ ;Rings for grooved faces

8104 = ’DIN 2695’ ;Diaphragm

8105 = ’DIN 2696’ ;Lenticular gaskets

8106 = ’DIN 2697’ ;Grooved O- rings

8107 = ’DIN 2698’ ;Corrugated steel sheet

Valves

9000 = ’Non conform DIN 3202’

9010 = ’DIN 3202-F’ ; Teil 1

9020 = ’DIN 3202-S’ ; Teil 2

9030 = ’DIN 3202-K’ ; Teil 3

9040 = ’DIN 3202-M’ ; Teil 4

9050 = ’DIN 3202-F’ ; Teil 5

Dummy standard

9999 = ’Dummy DIN Std’ ; Used for engineered items and instruments

British Standards geometry standards 12000-16999

sub ranges (provisional) :-

12000-12099 pipes

12100-12199 flanges

12200-12599 fittings

12600-12999 valves

13000-13199 bolts

13200-13499 gaskets

PIPES

12000 = ’BS3600 table 1 carbon and low alloy steel tubes’

12001 = ’BS3600 table 2 austenitic stainless steel tubes’

12002 = ’BS3600 table 3 high alloy ferritic steel tubes’

12003 = ’BS3600 table 4 cs tubes for compression fitting - tbi’

12004 = ’BS3600 table 5 ss tubes for compression fitting - tbi’

12010 = ’BS1387 tables 3,4 and 5 light,medium and heavy’

12015 = ’BS1600 part 2 steel pipe for petroleum industry’

FLANGES

12100 = ’BS4504 p1 steel flanges for pipe,valves and fittings’

12101 = ’BS4504 p1 iron flanges for pipe,valves and fittings - tbi’

12110 = ’BS1560 p2 steel pipe flanges Metric dimensions’

FITTINGS

12200 = ’BS1740 part 1 screwed wrought steel pipe fittings ’

12210 = ’BS1965 part 1 butt welding pipe fittings - CS’

12220 = ’BS3799 steel pipe fittings screwed and socket welding (mm)’

12221 = ’BS3799 steel pipe fittings screwed and socket welding (in)’

12230 = ’BS1640 part 3/4 steel butt-welding pipe fittings ’

VALVES

12600 = ’BS2080 flanged and butt-welded steel valves’

12620 = ’BS5150’

12625 = ’BS5151’

12630 = ’BS5152’

12635 = ’BS5153’

12640 = ’BS5154’

12645 = ’BS5155’

12646 = ’BS5155 and app A’

12650 = ’BS5156’

12651 = ’BS5156 and app A’

12655 = ’BS5157’

12656 = ’BS5157 and app A’

12660 = ’BS5158’

12661 = ’BS5158 and app A’

12665 = ’BS5159’

12666 = ’BS5159 and app A’

12670 = ’BS5160’

12671 = ’BS5160 and app A’

gaskets

13001 = ’BS4865:part 1 - non-metallic for BS4504 flanges’

13002 = ’BS4865:part 2 - spiral wound for BS4504 flanges’

13010 = ’BS3381 - spiral wound for BS1560 flanges’

bolting

13200 = ’BS4882 metric series bolting’

13210 = ’BS4882 inch series bolting’

dummy

13999 = ’dummy BS code’