Remove a load case from a load combination - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Analysis

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
11.x(2016)
  1. Click Select on the vertical toolbar.

  2. Select Load Combinations in the Locate Filter.

  3. Select the Analysis tab in the Workspace Explorer.

  4. Expand the Load Combinations folder under the analysis model.

  5. Right-click on the load combination, and then select Properties.

  6. Select the Load Cases tab.

  7. Select the load case to remove.

  8. Click Remove.

  9. Click OK.