Locate SmartPlant Fusion documents based on an interface and document relationship definition - Intergraph Smart Construction - 2018 (6.0) - Administration - Hexagon PPM

Intergraph Smart Construction Administration and Configuration (2018)

PPMProduct
Intergraph Smart Construction
PPMCategory_custom
Administration & Configuration
SPCVersion_custom
2018 (6.0)
SPFVersion_custom
2018 (7.0)
Version_SPMat_custom
8.2

You can configure which documents are displayed for attachment based on an interface and the tag-to-document relationship configured in SmartPlant Foundation Desktop Client.

This configuration is optional and should be used if you intend to use your own schema, instead of the delivered SmartPlant Fusion schema.

Update the system option

  1. Log on to SmartPlant Foundation Desktop Client as an administrator.

  2. Click Smart Construction > Find > Administration > Options.

  3. In the Find Smart Construction Options dialog box, type the name as SPC System Options, and click OK.

  4. In the search results, right-click SPC System Options, and select Update.

  5. In the Document Settings details section of the Update form, type an interface definition name in the Tags Query interface box.

    • ISPFNTag is the default interface.

    • Only one interface is supported at any given time.

  6. Type the name of a relationship definition in the Tag Documents RelDefinitions box.

    Use a tilde (~) to include more than one relation. A secondary relation is used when the primary relation returns zero results.

    • Smart Construction delivers -SPFNTagDocument as the default relationship definition. By default, the relationship definition is traversed from end 2 (ISPFNMasterTag) to end 1 (ISPFDesignDocRevision).

    • To traverse a relationship definition, refer the following table:

      To traverse this direction

      Use

      Example

      End 1 to End 2

      Plus symbol (+) before the name of the relationship definition

      or

      _12 after the name of the relationship definition

      +SPFNTagDocument

      or

      SPFNTagDocument_12

      End 2 to End 1

      Minus symbol (-) before the name of the relationship definition

      or

      _21 after the name of the relationship definition

      -SPFNTagDocument

      or

      SPFNTagDocument_21

  7. Click Finish to save your changes.