Define Fluid Densities - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Piping Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Reference Data
Smart 3D Version
11 (2016)
  1. Open the Piping Specification.xls workbook.

  2. Select the FluidDensityRule sheet.

  3. Select a row after the Start keyword but before the End keyword, and click Insert > Row.

  4. In the Fluid Code column, enter the fluid code short description for which to define a density.

  5. Specify the temperature range for the fluid density. Include the temperature unit, for example F or C, when defining this range.

  6. In the Density column, enter the fluid density. Be sure to include the units of measure, for example lbm/ft^3 or kg/m^3, when specifying this value.

  7. Save the Piping Specification.xls workbook.

  • The fluid code short descriptions are defined on the AllCodeLists.xls workbook in the FluidCode sheet in the Fluid Code Short Description column.

  • For cryogenic liquids and compounds that can change phases, you must define a different fluid code, and thus a different density, for each of the different phases.

See Also

Fluid Density Rule