ZS_TD_VAL - Intergraph Smart Materials - Version 2020 (10.0) - Administration & Configuration - Hexagon PPM

Intergraph Smart Materials Classic Administration (2020)

Language
English
Product
Intergraph Smart Materials
Subproduct
Classic
Search by Category
Administration & Configuration
Smart Materials/Smart Reference Data Version
2020 (10.0)

This project default controls validating the table detail length with the number of digits allocated for the corresponding table in the commodity rule.

If ZS_TD_VAL is set to W and the length of the table detail entered / selected in the Commodity Code Detail block of S.30.11 and S.30.01 does not match the number of digits allocated in the rule, a warning message is issued.

If ZS_TD_VAL is set to E and the length of the table detail entered / selected in the Commodity Code Detail block of S.30.11 and S.30.01 does not match the number of digits allocated in the rule, an error message is issued and you cannot proceed without resolving this issue.

If ZS_TD_VAL is set to N, no validation is performed regarding the length of the table detail.

  • Module(s) affected by this setting: S3001, S3011

  • Default value: N

  • List of Values: E, N, W