Anchor Bolt - CADWorx - Help

CADWorx Structure

Language
English
Product
CADWorx
Subproduct
Structure
Search by Category
Help
CADWorx Version
20.1 (2020 R1)
CADWorx Structure Version
2020 R1 (4.1)

CADWorx Structure tab: Model panel > Connections > Anchor Bolt

Places anchor bolts or holes in base plates.

Connection

Load a previously created anchor bolt template, or create and save a new anchor bolt template.

Hole

Row Count

Enter the number of bolt hole rows.

Row Spacing

Enter the distance between the bolt hole rows. The Row Count and the Row Spacing is centered on the plate.

Column Count

Enter the number of bolt hole columns.

Column Spacing

Enter the distance between the bolt hole columns. The Column Count and the Column Spacing is centered on the plate.

  1. Column Spacing

  2. Diameter

  3. Row Spacing

  4. Column Count

  5. Row Count

Diameter

Enter the diameter of the bolt hole.

Slotted Length

Enter a distance to create an elongated bolt hole. This distance is measured from the hole center.

Rotation

Enter the angle at which to rotate the bolt hole rows and columns within the end plate.

X Offset

Specifies the X-axis offset for the bolt holes. Bolt holes placed at zero offset are at the end plate center.

Y Offset

Specifies the Y-axis offset for the bolt holes. Bolt holes placed at zero offset are at the end plate center.

Anchor Bolt

Bolt Type

Specify the bolt type used in the clip connection.

Data Table

Specify the data table for the anchor bolts.

Bolt Size

Specify the size of the bolts.

Bolt Material

Specify the bolt material.

Rotation

Specify the angle of the anchor bolt.

Leg Direction

Specify the direction of the leg (outside, inside). This is used when you have a J bolt or L bolt.

Group

Specifies the assigned group. When you select a group from the list, the layer automatically updates to the layer assigned to that group. The groups that display in the Group list come from the Group Manager in the Structure Editor. For more information, see Group Manager in the CADWorx Structure Editor Users Guide.

Layer

Specifies the assigned layer. Layers default to the assigned group. However, you can change a layer as needed. The layers that display in the Layer list come from the Layer Manager in the Structure Editor. For more information, see Layer Manager in the CADWorx Structure Editor Users Guide.

Details

Long Description

Defines the long description for the anchor bolt.

Short Description

Defines the short description for the anchor bolt.

Part Number

Specifies the part number for the anchor bolt.

Tag

Defines the tag description of the anchor bolt.