Insert a wall by points - CADWorx - Help

CADWorx Structure

Language
English
Product
CADWorx
Subproduct
Structure
Search by Category
Help
CADWorx Version
20.1 (2020 R1)
CADWorx Structure Version
2020 R1 (4.1)
  1. Click Area Objects on the Model panel.

    If you open all the palettes from the Model panel, you can switch between palettes with the available tabs.

    The Area Objects palette displays.

  2. Click Walls .

    The Walls palette displays.

  3. Select Rectangular, Tee, or Tapered Tee.

  4. Select the Section Data Table.

  5. Select the Wall Size. You can select Custom when inserting a Rectangular wall.

    The Wall Height and Thickness automatically populates.

    If you selected Rectangular and Custom, then do the following:

    1. Type the Wall Height.

    2. Type the Thickness.

  6. Type the Horizontal Offset.

  7. Select a Composition.

  8. Select a Face Position.

  9. Select a Corner Treatment.

  10. Select a Top of Wall.

  11. If you selected Rectangular and Custom, then do one of the following:

    1. Select the Calculate Weight check box.

      OR

    2. Type the Weight.

  12. Select a Material.

  13. Select a Group and a Layer.

  14. Select Points from the Place By list.

  15. Click Insert.

  16. Select a start point for the wall.

  17. Select additional points to outline the area of your wall.

    As you select your points, the software displays a line connecting the points.

  18. Press ENTER to finish.

    CADWorx Structure places the wall.

Double-click the wall to edit any property.