Tap Properties - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
11.x(2016)

The Tap Properties Data node (the TapProperties sheet in the Piping.xls workbook) defines the taps that you want in your parts catalog.

End Preparation (Required)

Enter the end preparation code for the part port. Valid codes are listed in the AllCodeLists.xls workbook on the EndPreparation sheet in the Codelist Number column.

End Standard (Required)

Enter the end standard code for the part port. Valid codes are listed in the AllCodeLists.xls workbook on the EndStandard sheet in the Codelist Number column.

Flow Direction (Conditionally Required)

Enter the flow direction code for the port. Specifying the correct flow direction code for each part port is very important because the software automatically orients the part to the flow direction of the pipe or port to which the part is connected. Valid codes are listed in the AllCodeLists.xls workbook on the FlowDirection sheet in the Codelist Number column.

ID (Required)

Type a unique identifying name for the port.

NPD (Required)

Type the nominal piping diameter for the part port. Unless you specify otherwise, the software defines port 1 as the primary port.

NPD Unit Type (Required)

Specify the units for the NPD column. For example, type mm or in.

Piping Point Basis (Required)

Type the piping point basis code that identifies the function of the port. Valid codes are listed in the AllCodeLists.xls workbook on the PipingPointUsage sheet in the Codelist Number column.

Pressure Rating (Conditionally Required)

Enter the pressure rating code for the part port. Valid codes are listed in the AllCodeLists.xls workbook on the PressureRating sheet in the Codelist Number column.

Schedule Thickness (Conditionally Required)

Type the schedule thickness short description or code for the part port. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the ScheduleThickness sheet in the Codelist Number and Schedule Thickness Short Description columns.

Tap Number (Required)

Specifies a commodity code for the tap. The software uses this commodity code to find the tap in the catalog. This code must be unique across the catalog.

Termination Class (Required)

Select the termination class for the tap.

Termination Subclass (Required)

Select the termination subclass for the tap.

See Also

Piping Parts
Permissible Taps